Vive Tracker Isolation Mount for 40 series Profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An isolation mount for the Vive Tracker to be used with VR motion compensation for a sim rig.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a vibration damping mount for a Vive Tracker to be used with motion compensation software.
EDIT: This absolutely will not dampen my D-Box haptics on the race track over a rumble strip or in Rally. It might be suitable for MSFS and smooth flight.
It utilizes Drone anti-vibration shocks that can be found here.
https://www.amazon.com/dp/B07WGPVZM6
There is room for a 1/4x20 by ½" long bolt to secure the Vive tracker.
It uses two M8x16 bolts to secure it to a profile by T-nuts, or threaded holes in the end of the profile. ( Added a spacer for use with M8x55mm bolts if a stand off is needed )
I'm currently using this with the OpenXR-MotionCompensation here.
https://github.com/BuzzteeBear/OpenXR-MotionCompensation
I have to give credit to Bjorn who created the initial files I started from. His solution is not currently published.