Maglock Box (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and slim box with a magnetic lock. The lid will close with a satisfying snap. A Fusion360 file is included.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple box with a Magnetic locking mechanism. Ideal as a case for pens, small tools or other stuff that need a box. You will need two 10x2 mm magnets (size of the magnets can be changed in Fusion 360).
Easy to print:
Just place both parts on the print bed and add a pause just before it closes each hole for the magnets. Use the pauses to add the magnets. See the picture for the alignment of the magnets.
Parametric:
I included the Fusion360 file so that you can adapt the box to your own specifications. You can change the inner length, width, height and the diameter of the magnets.