1 / 5
90° V-Slot Corner Bracket for 20x20 Extrusion (No supports)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
90° V-Slot Corner Bracket used to assembly 20x20 aluminum extrusion.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 362
- Wydruki
- 2
- Wyświetlenia
- 933
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (71)Powiązane
This project is a connector for v-slot profiles. It is a printable alternative to more rigid metal connectors (unfortunately often of poor quality).
The model does not require supports, for optimal strength the print should be done as shown in the screenshot from PrusaSlicer.
I recommend making it out of PET-G, but it will probably work with PLA and ABS too.
Have fun with it!