Voron 2.4 Bedpan v3 with silicon nozzle wiper

First of all credits goes to the original design: https://github.com/Midnite3DP/voron-bedpan

I slightly changed a lot from this design to have a smooth Bedpan design with cover for my Voron 2.4 (no matter which bed size.

Originally I used the brass brush type to wipe my nozzle but I saw the nozzle wiper from Bambulab A1 mini and modified my bedpan to mount it.

All you need is all print files (print in ASA or ABS best as it is close to the heatbed). The only thing you need to modify is the "intermediate plate" to your desired size.

For this please measure the height from your Voron 2.4 from the top of the deck panel to the top of your printplate. From this measurement (e.g. 37mm) you deduct 35mm and you have the size of your intermediate plate. Then the silicon brush of the A1 mini wiper will be around 3mm above your printplate and you are good to wipe.

For my Voron 2.4 the intermediate plate needs to be 2mm, but just adjust the height of this plate to your printer needs in your Slicer.

BOM:

6x M3x8 SHCS

4x M3 T-Nuts

20x 6x3mm magnets

2x M3 Threaded Insert (M3x5x4 / Voron type)

1x Bambulab A1 mini nozzle wiper (https://eu.store.bambulab.com/de/collections/accessories-for-a1-mini/products/heatbed-nozzle-wiper-a1-mini)

To make use of this bedpan I used following macro: 

As the github Repo seems disappeared I reuploaded the macro as txt file in the attachement.

Print Settings

Printer Brand:

VoronDesign

Printer: 

Voron2 300

Rafts:

No

Supports: 

No

Resolution:

0,2

Infill: 

42

Filament: Nobufil ABSx aluminium grey

Category: 3D Printer Accessories