4" Downlight adapter for 6" Ceiling Light Can (Philips Hue Phoenix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for fitting a new 4" LED ceiling light into an existing 6" can space with spring mounts.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 726
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I assume this could easily be used for fitting other 4" ceiling lights into an old 6" can space, but it was specifically designed for a Philips Hue Phoenix 4" downlight (older model, not the new “slim” ones). My light can has springs that hold the bezel into the ceiling, which is what the holes in the spring mount arms are for
Recommend slicing in PrusaSlicer with variable layer height enabled for the bezel so that you get a smoother curve, and prints well with an MMU and breakaway support material to support the bezel. I used PLA and Polymaker PolySupport™ with good results.
NOTE: Photos taken before I added the face blend on the spring mounts, to improve strength.