4" Downlight adapter for 6" Ceiling Light Can (Philips Hue Phoenix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for fitting a new 4" LED ceiling light into an existing 6" can space with spring mounts.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 51
- Makes
- 0
- Views
- 720
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
I assume this could easily be used for fitting other 4" ceiling lights into an old 6" can space, but it was specifically designed for a Philips Hue Phoenix 4" downlight (older model, not the new “slim” ones). My light can has springs that hold the bezel into the ceiling, which is what the holes in the spring mount arms are for
Recommend slicing in PrusaSlicer with variable layer height enabled for the bezel so that you get a smoother curve, and prints well with an MMU and breakaway support material to support the bezel. I used PLA and Polymaker PolySupport™ with good results.
NOTE: Photos taken before I added the face blend on the spring mounts, to improve strength.