1 / 2
Skadis T-Nut Mount for Makita DC18SD
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for Makita DC18SD charger (not DC18RC) that mounts into Ikea Skadis using T-Nut mounting system.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 148
- Wydruki
- 2
- Wyświetlenia
- 1059
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (1)Kolekcje (53)Powiązane
This model does not fit DC18RC
Pull out rubber feet from the bottom of the charger and mount brackets into holes. To mount brackets you'll need both T-Nuts and alignment guides, which you can find here: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb
Note
I've modeled this with excessive tolerances, so for a snug fit you might want to add a layer of electrical tape over the pegs that go into the charger.
