Rotating Dishwasher Clean/Dirty/Washing Magnetic Sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,68 € – 2,05 € netto (bez VAT)
Dla pliku: Using 5 different colors in PLA with MK4ISMMU3 / dishwasher_indicator_04n_02mm_plaplaplaplapla_mk4ismmu3_1h30m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,87 € netto (środek widełek).
- Masa podana przez autora
- 31 g
- Czas druku podany przez autora
- 1,5 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Dishwashers nowadays are usually so quiet that people don’t realize it is running. Family members may open it…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 233
- Wydruki
- 2
- Wyświetlenia
- 1460
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Dishwashers nowadays are usually so quiet that people don’t realize it is running. Plus my appliance is so well designed that no buttons, lights or indicators are visible when it is closed. Family members may open the dishwasher by mistake when it is running and flood the kitchen, so this dishwasher magnet sign also indicates “WASHING” besides just “CLEAN” and “DIRTY”. So the kids will have no excuse for not putting their dishes in when the sign says DIRTY.
I designed this clean/dirty sign with 3 magnets inside so that as the indicator ring is rotated, it stops at the 3 positions and will not unintentionally turn on its own due to vibrations or other disturbances.
Requires four 12mm diameter x 3mm (or smaller) strong magnets. [Version 1 is designed for three 10mm x 2mm round magnets and one 7mm x 1mm round magnet.]
New Version 2
I added improvements to the design. The parts are now a bit thicker and can accommodate magnets up to 3mm x 12mm. The front now snaps into the back so gluing isn't necessary.
Print Settings
Printer:
Creality Ender 3 Pro
Supports:
No
Filament:
white, copper
Notes:
STL files for the text are also included for 2 color prints.
I printed 2 color on a stock ender 3 pro by first printing the text in one color and then (without removing the print) I printed the rest around and over the text in a different color.
Post-Printing
Glue in the magnets and also the back and the cover, being careful not to glue the rotating wheel (version 2 should just snap into place). Also take care to insert all the magnets the facing same way and not to get the one magnet in the dial wheel backwards. Make sure it is attracted and not repelled by the other magnets.
Category: Kitchen & Dining
