1 / 5
Voron 2.4 LED aluminum profile mounts with hidden cables — zdjęcie 1
1 / 5

Voron 2.4 LED aluminum profile mounts with hidden cables

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Voron 2.4 lighting using aluminum LED profiles and bright LED strips

Ocena
5 / 5
Polubienia
15
Pobrania
88
Wydruki
1
Wyświetlenia
1948
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Features:

  • allows mounting aluminum LED profile under the left/right top 2020 extrusion
  • mentioned aluminum profile is used for cooling LEDs. Profile is sold here under “TRILINE-MINI” brand, symbol PROFIL-MN-3LM-CZ-2C. Refer to the image for dimensions.
  • profile can be mounted with or without a diffuser cover
  • all cables are hidden
  • driven by PWM signal from controller board allowing brightness to be controlled
  • bright V-TAC LEDs, model V-TAC VT-2835 238. 2550LM/m, 24V, 4000K colour temperature. A brightness level of 25% is sufficient for Voron printer usage. 80cm of LED strip takes about 12W at 24V.

 

For Voron 2.4 350mm two 40cm led profiles were cut (by hand). 

Print top-corner-cable-hide-led-profile and top-corner-cable-hide-led-profile-end and mirrored (in slicer) two copies.

8pcs M3x20 BHCS/SHCS (if these are too short you can use M3x25 BHCS/SHCS and if these are too long then use with fastener-led.stl). 8x hammerhead or t-nut.

Two LED strips are connected in parallel to HE2 (heater output) of Octopus board using 20 AWG wires.

All cables hidden in 2020 vertical profiles using https://www.printables.com/model/208845-2020-aluminum-extrusion-cover cover. Then into electronics compartment using https://www.printables.com/model/634040-voron-24-z-belt-cover-with-cable-routing .

 

Klipper configuration:

[led chamber_light]
white_pin: PB10 # HE2 heater
initial_WHITE:0.25  # initial startup 25% brightness level
cycle_time: 0.01
 

(will also be visible in KlipperScreen as LED controlls)

 

Fusion 360 and step source files available. Changing for other aluminum LED profiles shouldn't be hard.

 

Tagi