1 / 5
Voron 2.4 LED aluminum profile mounts with hidden cables — image 1
1 / 5

Voron 2.4 LED aluminum profile mounts with hidden cables

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Voron 2.4 lighting using aluminum LED profiles and bright LED strips

Rating
5 / 5
Likes
15
Downloads
88
Makes
1
Views
1,948
Reviews
1

Updated at source:

Model information

License
GNU General Public License v3.0

Features:

  • allows mounting aluminum LED profile under the left/right top 2020 extrusion
  • mentioned aluminum profile is used for cooling LEDs. Profile is sold here under “TRILINE-MINI” brand, symbol PROFIL-MN-3LM-CZ-2C. Refer to the image for dimensions.
  • profile can be mounted with or without a diffuser cover
  • all cables are hidden
  • driven by PWM signal from controller board allowing brightness to be controlled
  • bright V-TAC LEDs, model V-TAC VT-2835 238. 2550LM/m, 24V, 4000K colour temperature. A brightness level of 25% is sufficient for Voron printer usage. 80cm of LED strip takes about 12W at 24V.

 

For Voron 2.4 350mm two 40cm led profiles were cut (by hand). 

Print top-corner-cable-hide-led-profile and top-corner-cable-hide-led-profile-end and mirrored (in slicer) two copies.

8pcs M3x20 BHCS/SHCS (if these are too short you can use M3x25 BHCS/SHCS and if these are too long then use with fastener-led.stl). 8x hammerhead or t-nut.

Two LED strips are connected in parallel to HE2 (heater output) of Octopus board using 20 AWG wires.

All cables hidden in 2020 vertical profiles using https://www.printables.com/model/208845-2020-aluminum-extrusion-cover cover. Then into electronics compartment using https://www.printables.com/model/634040-voron-24-z-belt-cover-with-cable-routing .

 

Klipper configuration:

[led chamber_light]
white_pin: PB10 # HE2 heater
initial_WHITE:0.25  # initial startup 25% brightness level
cycle_time: 0.01
 

(will also be visible in KlipperScreen as LED controlls)

 

Fusion 360 and step source files available. Changing for other aluminum LED profiles shouldn't be hard.

 

Tags