Bench Station for Gatco/Lansky Knife Sharpening Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A convenient station to hold a blade holder / angle guide and 6 stones from a Gatco (Lansky-style) sharpening kit.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A convenient station to hold a blade holder / angle guide jig and 6 stones from a Gatco (Lansky-style) sharpening kit. The jig is securely held but easily removed and flipped 180º for switching from side to side.
Recommend printing the front edge of the base with high infill (50-80%) to give it strength for use as a place to clamp the station to the edge of a table.
Up until I actually finished designing and testing this, I thought I had a Lansky-brand kit. Alas, it is a Gatco-brand kit. It may still work for the very similar Lansky kit, but I can't say for sure.
Prints on a Prusa Mini+.
No supports.
Recommend 15% infill except at the front lip as noted above.