Bench Station for Gatco/Lansky Knife Sharpening Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A convenient station to hold a blade holder / angle guide and 6 stones from a Gatco (Lansky-style) sharpening kit.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 81
- Makes
- 0
- Views
- 561
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A convenient station to hold a blade holder / angle guide jig and 6 stones from a Gatco (Lansky-style) sharpening kit. The jig is securely held but easily removed and flipped 180º for switching from side to side.
Recommend printing the front edge of the base with high infill (50-80%) to give it strength for use as a place to clamp the station to the edge of a table.
Up until I actually finished designing and testing this, I thought I had a Lansky-brand kit. Alas, it is a Gatco-brand kit. It may still work for the very similar Lansky kit, but I can't say for sure.
Prints on a Prusa Mini+.
No supports.
Recommend 15% infill except at the front lip as noted above.