1 / 9
Parkside X20V Vacuum (PHSSA 20-LI C1) Filter Cover — zdjęcie 1
1 / 9

Parkside X20V Vacuum (PHSSA 20-LI C1) Filter Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filter cover to reduce dirt, animal hair and stones getting inside the filter for the cordless Parkside 20V Vacuum.

Ocena
5 / 5
Polubienia
61
Pobrania
497
Wydruki
10
Wyświetlenia
2252
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Filter cover to reduce dirt, animal hair and stones getting inside the filter for the cordless Parkside 20V Vacuum.

Printed the model myself without supports, but you probably get better rounded corners when you do enable it. Of course, inside the vacuum you will not see it. Print ‘upside-down’' (already the case with the provided STL-file).

Model still fits the latest vacuum sold at the time of writing (nov 2023).

No noticable loss of suction power (reason for the many big holes).
My own version was printed on an Ender-3 v2 (with Sprite Pro extruder) with fairly standard settings (3 walls, 0.2mm layer height)..

 

In case you appreciate this design, please like the model, post a make or comment. :)

Tagi