1 / 9
120mm fan to 100mm duct with twist lock connection
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
120mm fan to 100mm duct with twist lock connection
- Ocena
- 4,75 / 5
- Polubienia
- 130
- Pobrania
- 768
- Wydruki
- 5
- Wyświetlenia
- 2625
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 5) (Komentarze: 8)Remiksy (1)Kolekcje (193)Powiązane
I wanted to be able to quickly connect and disconnect my 100mm duct to the 120mm fan of my engraving housing so I created this twist lock connection set.
- duct for 120mm fan
- 100mm duct hose (with a notch for optional attachement of a zip tie
- lid for fan duct when duct hose not connected
You have to print with minimal supports. See my cura screenshots for recommendation.
Print Settings
Supports:
Yes (see screenshots)
Resolution:
0.2
Wall Line Count:
3
Infill:
10%