Motorcycle Guards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motorcycle Gueards (Golf ball shaped)
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 2395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple design I create for myself and wanted to share.
Guards (Golf ball shaped) for the bars of your motorcycle to protect from scratches.
===================================================
Size:
Sphere diameter = 60mm
Inner hole diameter = 22mm (can make more if you like)
===================================================
Recommended settings:
Infill: 25%+
Filament : PETG or Stronger
**TPU Should work fine too**
===================================================
Extra part you will need:
2 x (M4x30) Screws and their Nuts ( 7mm height & 3.2 width aprox.)
===================================================
Instructions :
Slide the nuts into the side holes of Part 2 and align them with the screw
Screw and you're ready :P