Cup raiser for Delonghi Magnifica coffee machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raise the expresso cups to avoid splashes everywhere.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do your coffee machine splashes coffee everywhere even with the dispenser lowered? Well this little thing will allow you to put your cups 3cm higher.
The raiser have little feet to lock itself in position using the holes of the plate, and have enough room for two cups side by side.
In case your plate has a different shape, you can cut the little feet in your slicer.
Print it with the hexagons facing the build plate. I recommend printing the first 2mm slowly (I used 20mm/s for a nice finish. You can use a modifier in your slicer, as shown in the screenshot.
I provided my fusion360 file if anyone wants to improve on it.
Happy coffee!