Case for Buck Converter with LCD Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy case for one of the LM2596 converter boards
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 407
- Wydruki
- 0
- Wyświetlenia
- 1305
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I wanted a sturdy case for an LM2596-based buck converter I found on Amazon. There are a lot of suppliers for these, this is one I've purchased and tested with this case.
The model uploaded is PLA @ 0.15mm and it's a very nice print. It can be done in PETG and I have also printed it in 0.20mm fast with pretty good results.
Depending on your printer and filament, you may need to print a brim around the buttons. With PLA I found this necessary, I did not need it with PETG.
This uses 4 hex head M3 x 16mm screws to sandwich the board and close the case.