1 / 5
Case for Buck Converter with LCD Display
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sturdy case for one of the LM2596 converter boards
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 407
- Makes
- 0
- Views
- 1,305
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I wanted a sturdy case for an LM2596-based buck converter I found on Amazon. There are a lot of suppliers for these, this is one I've purchased and tested with this case.
The model uploaded is PLA @ 0.15mm and it's a very nice print. It can be done in PETG and I have also printed it in 0.20mm fast with pretty good results.
Depending on your printer and filament, you may need to print a brim around the buttons. With PLA I found this necessary, I did not need it with PETG.
This uses 4 hex head M3 x 16mm screws to sandwich the board and close the case.