Caribou3D OLED Hyperpixel4 Cover (on 3030 profile or outside cabinet)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Caribou cover is designed for the OLED display and an additional HyperPixel4.0 touchscreen. The Raspberry Pi is…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This Caribou cover is designed for the OLED display and an additional HyperPixel4.0 touchscreen. The Raspberry Pi is NOT mounted directly behind the display so that there are no visible power and USB cables on the control unit. I used a 30cm/40 pin IDC extension cable to connect the Pi and mount it to the cabinet.
I added also the files for mounting it on the 3030 profile.
The ..._mount_mid needs 2x M3x12 screws.
Print Settings
Printer:
Caribou MK3s 320
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
35%
Filament:
DasFilament PETGCaribou Green
Notes:
Enclosure_mount_base was printed in white PLA.
Category: 3D Printer Parts