Caribou3D OLED Hyperpixel4 Cover (on 3030 profile or outside cabinet)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Caribou cover is designed for the OLED display and an additional HyperPixel4.0 touchscreen. The Raspberry Pi is…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This Caribou cover is designed for the OLED display and an additional HyperPixel4.0 touchscreen. The Raspberry Pi is NOT mounted directly behind the display so that there are no visible power and USB cables on the control unit. I used a 30cm/40 pin IDC extension cable to connect the Pi and mount it to the cabinet.
I added also the files for mounting it on the 3030 profile.
The ..._mount_mid needs 2x M3x12 screws.
Print Settings
Printer:
Caribou MK3s 320
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
35%
Filament:
DasFilament PETGCaribou Green
Notes:
Enclosure_mount_base was printed in white PLA.
Category: 3D Printer Parts