Coin vortex as a Piggy bank

23.11.2023 Update:

• BASE_SMALL V2 added - walls are now 2 mm thick instead of 1 mm

20.11.2023 Update:

• VORTEX V2 - smaller, steeper and has the insert directly connected
• BASE_SMALL  - reworked - wider walls and smaller radius at the bottom for better printability

________________________________________________________________________________________________________________

Introduction:

The base is available in large and small.

The vortex is also available in two different versions. 

Version 1:  wider and flatter

Version 2: smaller, steeper and has the insert directly connected

I prefer version 2.

All threads are 36 x 3 mm so that all parts can be combined with each other.

________________________________________________________________________________________________________________

Printing instructions:

Printed in PLA with a layer height of 0.2mm.

Except for the threads, which were set to 0.1 with a height range modifier (not necessary, but improves the result).

Choose the infill you want (I chose 5%). 

I uploaded all files as 3mf.

Includes support structures and height range modifiers. 

For the “INSERT” or “VORETEX 2” file, select the support setting “For support executors only”.

Optional: organic support 

________________________________________________________________________________________________________________

Have fun printing 😜