Thunder Tiger Raptor 30/50/SE Tail pushrod guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Im feeling nostalgic and bought a Raptor 30. But parts are scarce and expensive on the flea-bay. So I made some
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Im feeling nostalgic and bought a Raptor 30. But parts are scarce and expensive on the flea-bay. So I made some.
Up for your printing enjoyment is Thunder Tiger Raptor Tail pushrod guides.
I printed them out @ 0.2 in Ovature PLA. I will probably do the final in ASA or PETG because of the outdoors and heat..
I used a 5mm Brim inside and out for stability
No supports needed.
Just make sure your printer is on point with its calibration, they are made to factory original size. I have test fit them and they are perfect.