Thunder Tiger Raptor 30/50/SE Tail pushrod guides
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Im feeling nostalgic and bought a Raptor 30. But parts are scarce and expensive on the flea-bay. So I made some
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 42
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Im feeling nostalgic and bought a Raptor 30. But parts are scarce and expensive on the flea-bay. So I made some.
Up for your printing enjoyment is Thunder Tiger Raptor Tail pushrod guides.
I printed them out @ 0.2 in Ovature PLA. I will probably do the final in ASA or PETG because of the outdoors and heat..
I used a 5mm Brim inside and out for stability
No supports needed.
Just make sure your printer is on point with its calibration, they are made to factory original size. I have test fit them and they are perfect.