Eazy Plug add-ons for Herbert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add-ons to use Eazy Plug CT104C seed starter plugs with Herbert vertical garden by Ponix Systems
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 1392
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Add-ons to use Eazy Plug CT104C seed starter plugs with Herbert vertical garden by Ponix Systems
All printed with 0.3 DRAFT settings in Prusa Slicer.
There are five add-ons:
Basket
The basekt to hold the Eazy Plug CT104C seed starter plug. Place the seed starter plug in while still dry, it's already a tight fit to prevent light entering the growing modules. Add water and plant the seed.
Germination caps
Use these caps during germination. The germination caps are printed as two parts so no supports are needed. You need the original, transparent cap coming with your Herbert, they should snap-fit on the caps. The transparent caps have a slight chamfer on the edges, make sure to have the wider side bottom facing.
Basket caps
They are used after germination. The main purpose is to seal of the two holes in the top of the basekt and to add color 🎨.
Not-in-use caps
Used to seal of the growing module while not in use. They are completely optional, you could still use the original ones.
Storage container
A simple container to store the caps. The container fits into the accessory boxes that came with Herbert.
I also made some (replacement) parts for the original growing system: Ponix Systems Herbert accessories/parts
Please leave a comment or a photo if you print it!