Anycubic Chiron to ChironWIre Drill guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are drill guides to assist in drilling the holes in frame and Y-carriage for the Switchwire/MGN12 rail upgrades
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 150
- Wydruki
- 1
- Wyświetlenia
- 1364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
These are drill guides for the Anycubic Chiron to Voron Switchwire (aka Chironwire) to help with placement of the holes on the Y- carriage for the MGN12 linear bearing carriages, and also the -30mm relocation of the Z towers on the 2040 extrusion, so that the full 400mm of bed travel can be kept when adding the linear rails to X. the purpose of the long arm in the middle of the MGN12 guide- is so that using two of the guides, you can butt them up to each other and that *should* center them over where the linear rails will go, once installed on the 2040 extrusions below the Y carriage.