Christmas Ball - Medium Diamond Lattice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,17 € – 0,21 € netto (bez VAT)
Dla pliku: Christmas Ball Cap 1X_0.4n_0.1mm_PLA_MK3S_16m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,19 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 15,6 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
An elegant, easy print for the holidays that works at any size.
- Ocena
- 4,846 / 5
- Polubienia
- 468
- Pobrania
- 1096
- Wydruki
- 15
- Wyświetlenia
- 5199
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I originally designed this as a mini ornament. It looks great at that size (1X), but looks even better at 1.5X and should look good at even larger sizes. At 1X, it's about the size of a golf ball. At 1.5X, it's a standard Christmas ball size. I assume most people will print this at 1.5X, so that's what I've used the the time estimate.
I've provided a couple versions of the ball - in 2 pieces and in 1 piece (not including the cap). I recommend printing it as 2 pieces. It's a lot smoother that way and the ball prints without supports. I've provided my PrusaSlicer 3MF files and MK3S+ GCODE for the 2 piece print at all 1X and 1.5X. I've provided the ball as 1 piece mostly in case someone wants to experiment with cutting it in a different place or you want to print the ball as 1 piece using a 3 color filament.
I've provided my PrusaSlicer 3MF files as well as the GCODE to print the ornament on a Prusa MK3s+.
You might think this needs infill everywhere, but it really doesn't. I used height range modifiers in PrusaSlicer to add a few layers of infill (25 - 30%) in a few places where something starts to print unsupported. It printed really well and it's light.
I printed most of the ornament with just 1 perimeter. At the bottom of each half, where the halves later get glued together, I used 2 perimeters. I used 2 and the top of the top half and 3 at the top of the bottom half. The cap is printed with 2 perimeters everywhere.
I printed the 1.5X and ball with supports to get a cleaner print on the dome, but that's optional. That part of the ornament would not be easy to see once assembled.
I used custom seams to put as many as I could on the inside of the ball where they don't show.
I printed the 1X ball with 0.1mm layer height and 1.5X at 0.15mm.