kusba mount for flsun v400
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
kusba mount when using flsun v400 fan cover for btt knomi screen
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 732
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Mount to attach kusba adxl accelerometer to flsun v400 when using the fan shroud for the BigtreeTech Knomi screen. I plan on leaving my accelerometer install permanently. 3mf file is attached feel free to do whatever you like.
I printed flat with support, I used a support fill of 40%.
- Print the mount flat with 40% support.
- Use soldering iron to heat the m3 nuts into the kusba mount. You may be able to press them in, I used petg to print this so i didn't try?
- Attach the kusba mount to the fan shroud with a 1xM3*35mm screw
- Insert the kusba accelerometer into the kusba mount.
- Use 2xM3*8mm screws to attach the kusba accelerometer to the mount.
Screws on Amazon:
https://www.amazon.com/Assortment-Stainless-Replacement-Machine-Fastener/dp/B0BMQFHDBH/ref=sr_1_3?crid=1GLH8JJOJ1IFC&keywords=m3%2Bscrews&qid=1700790405&sprefix=m3%2Bscrews%2Caps%2C141&sr=8-3&th=1
Flsun V400 fan shroud for Bigtreetech Knomi screen on extruder
https://www.printables.com/model/495528-flsun-v400-fan-cover-for-bigtreetech-knomi