kusba mount for flsun v400
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
kusba mount when using flsun v400 fan cover for btt knomi screen
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 732
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Mount to attach kusba adxl accelerometer to flsun v400 when using the fan shroud for the BigtreeTech Knomi screen. I plan on leaving my accelerometer install permanently. 3mf file is attached feel free to do whatever you like.
I printed flat with support, I used a support fill of 40%.
- Print the mount flat with 40% support.
- Use soldering iron to heat the m3 nuts into the kusba mount. You may be able to press them in, I used petg to print this so i didn't try?
- Attach the kusba mount to the fan shroud with a 1xM3*35mm screw
- Insert the kusba accelerometer into the kusba mount.
- Use 2xM3*8mm screws to attach the kusba accelerometer to the mount.
Screws on Amazon:
https://www.amazon.com/Assortment-Stainless-Replacement-Machine-Fastener/dp/B0BMQFHDBH/ref=sr_1_3?crid=1GLH8JJOJ1IFC&keywords=m3%2Bscrews&qid=1700790405&sprefix=m3%2Bscrews%2Caps%2C141&sr=8-3&th=1
Flsun V400 fan shroud for Bigtreetech Knomi screen on extruder
https://www.printables.com/model/495528-flsun-v400-fan-cover-for-bigtreetech-knomi