Crosscut sled for small bandsaw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crosscut sled for small bandsaw
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
This is a crosscut sled for a small bandsaw. I originally designed this sled to be made from ⅛" laser cut plywood, though the parts could also be 3D printed. The attached PDF file includes a layout of all parts for laser cutting.
To assemble the sled, make 1 each of “Rail” and “Bottom Plate”, 2 of “Back Plate”, and 4 of “Alignment Pin”. If 3D printing the parts, make 1 of “Back Plate - 2X Thick” instead. Use a suitable glue to fasten the parts together as shown in the images
The “Alignment Pin” is just a ¼" cylindrical pin, ¼" long, used to align parts with each other. It could be 3D printed, or a wooden dowel or other cylindrical stock could be used.
Design available here in Onshape.