Parametric foot for Ikea Eket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable feet for the Ikea Eket storage system; or anything else really.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
This was inspired by: https://www.thingiverse.com/thing:5388044.
Use OpenScad to modify to your needs.
(The only thing that isn't customizable is the corner radius, because I didn't want to further complicate the minkowski operation and the file itself. I think the chosen radius is reasonable and (most probably) nobody will need a version with screw holes larger than about 8mm.)
The STL File has a conical shape with 35mm lower and 40mm upper diameter, as well as 27.5mm overall height and three screw holes with 4mm diameter.
I printed with an overall height of 27.5mm to raise the Eket Elements to the height of my dining table, extending its overall usable space.