Parametric foot for Ikea Eket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customizable feet for the Ikea Eket storage system; or anything else really.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 73
- Makes
- 0
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
This was inspired by: https://www.thingiverse.com/thing:5388044.
Use OpenScad to modify to your needs.
(The only thing that isn't customizable is the corner radius, because I didn't want to further complicate the minkowski operation and the file itself. I think the chosen radius is reasonable and (most probably) nobody will need a version with screw holes larger than about 8mm.)
The STL File has a conical shape with 35mm lower and 40mm upper diameter, as well as 27.5mm overall height and three screw holes with 4mm diameter.
I printed with an overall height of 27.5mm to raise the Eket Elements to the height of my dining table, extending its overall usable space.