1 / 2
80/20 End Protection (Cap and Plate) for 1"x2" extrusions
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
80/20 End Protection (Cap and Plate) for 1"x2" extrusions
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 203
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I created these models to snap into place on the uncovered end of a “Double Six Slot T-Slotted Framing Rail” (aka 80/20) extrusion without needing to tap and drill.
I printed PETG at 0.2mm layer height with no issues.