Lenovo M90q AOC-STGN-I2S v2 Network Card Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AOC-STGN-I2S v2 Network Card Bracket for Lenovo M90q Tiny PC.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 230
- Wydruki
- 0
- Wyświetlenia
- 1649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the AOC-STGN-I2S v2 bracket designed by simbaja. His model was made for the M720q however I have a M90q which while very similar they changed the bracket area on the M90q ever so slightly causing the original design to no longer work.
I have made adjustments to all the areas necessary on this bracket so that it fits the Lenovo M90q tiny PC with a Supermicro AOC-STGN-I2S v2 SFP+ dual NIC.
I have only tested this design on the original M90q (not the gen 2 or gen 3 versions). When installing this the legs of the bracket should be on the underside of the network card. I found it easiest to install the network card first, then tilt it up slightly and push this bracket onto it to get it mounted.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
30
Filament:
Prusa PETG Jet Black
Printed with organic supports on my MK3S+.