540, 550, FusionSE and remixed parts for "Morrigan" by Black Crow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
540, 550, FusionSE and remixed parts for "Morrigan" by Black Crow
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 213
- Wydruki
- 0
- Wyświetlenia
- 1030
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
First, I would like to thank BlackCrow (RockyTop) for his cooperation and permission to post these remixes.
It is an honor for me to contribute to his excellent work with these remixes.
30.06.2024
added new clip for the powerbutton (FusionSE) for the new metal-gearbox.
02.06.2024
Fixed Front
—
This is additional to:
- "Morrigan" - 1:8 Scale RC Rock Bouncer Crawler by Black Crow
- Thumper's and Morrigan's Transmission Shop for 1:8 Scale Rock Crawler by Black Crow
I extended the front to accommodate a FusionSE (outer diameter: 36 mm, length: 58.1 mm). A 540 and a 550 should also fit.
Front Cover:
The front cover and the motor plate have been adapted for engines with bolt circles of 4x12.7 mm and 6x12.7 mm.
For the rest of the transmission, both the A and B gears can be used.
I have tested both with the FusionSE and an 1800kV outrunner, and my favorite for use as a crawler is model A. Here, a minimum speed of around 1 m/sec is possible. At full throttle, it is a little faster than walking speed.
This is not needed with metal gears.
Links: In order to avoid contact between the links and the drive shaft, a recess was created here. This is not needed with metal gears.
Powerswitch Bracket: I created a bracket for the powerswitch that can be screwed onto the gearbox housing. This is not compatible with metal gears.