Hexagon Benchy Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of xPlatypusVenom's Benchy display with a tighter fit of the slots, pocket for the benchy to seat, and base plate
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 787
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modular hexagon display system for test printing benchy models that can be displayed. If you squint a little, you can also use these models as a way to verify your print tolerances.
The stand base can be used on the bottom-most hex pieces as a more stable place to stand the display up on a desk or shelf.
Similar to the original design, I've included a nail guide with the tighter gap to assist with placing nails for wall hanging of the hexagons.
UPDATE - 11/7:
I've added a new file for a nameplate that can fit in the top section of the hexagon hoop, similar to my V2 remix.