USB, SD & Micro SD Holder - Fully Customizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1) f3d file provided to customize the design 2) watch the videos given in the description 3) use double sided tape
- Ocena
- 4,913 / 5
- Polubienia
- 114
- Pobrania
- 1218
- Wydruki
- 42
- Wyświetlenia
- 3366
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Design Background:
I needed a USB hub for 10 USB drives, 5 SD cards and about 10 Micro SD cards. I searched for one that fit my needs but couldn't find a perfect one. The designs online either had excess number of slots or had a shortage of them.
Therefore I have designed a parametric hub where you can decide the number of USB, SD or Micro SD slots you require and design is optimized accordingly.
YOU JUST NEED TO CHANGE 4 PARAMETERS AND YOU ARE DONE!!
- Number of USB Slots (Minimum 1)
- Number of SD Slots (Minimum 1)
- Number of Micro SD Slots (Minimum 1)
- Tolerance (depends on your printer, but the default value should suffice)
Note: You can also mess around with a lot of other parameters if you like, but manipulating the 4 parameters mentioned above is sufficient to generate a customized design.
Design Description:
Please watch both the videos completely to learn how to modify the design as per your liking.
Case 1 - When you want lesser number of slots than what is already provided in the f3d file
Case 2 - When you want more number of slots than what is already provided in the f3d file
Please do leave a comment, I would love to hear from you.
Gracias,
Joamon