Echo Show 8 V2 Magnetic Base Stand Thingy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clean and simple 15 degree tilt and slight lift for Echo Show 8 - add magnets to hold in place when moving around
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 633
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
Works with Echo Show 8 V2 - adds 15 degree tilt and lifts screen a few mm … couldn't find a model with magnets to hold it in place so quickly created this.
Print …
Easy to print -
- PETG / PLA or whatever
- 0.24mm layer height
- 15% infill
- no supports
(excuse slightly “meh” finish on print, yours will be far better I'm sure - filament was damp from factory!)
NOTE: when inserting magnets from underside, make sure you have the polarity right for the base of the echo show.
- 6x3mm version requires 2x magnets per hole to really hold the base nicely
- 10x3mm version created / added but not tested (would imagine 6 10mm magnets should be fine though - let me know in comments)
HINT: to press magnets in to place get a steel hex/allen key or similar - should not need glue.