1 / 3
Echo Show 8 V2 Magnetic Base Stand Thingy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clean and simple 15 degree tilt and slight lift for Echo Show 8 - add magnets to hold in place when moving around
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 113
- Makes
- 1
- Views
- 633
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Description
Works with Echo Show 8 V2 - adds 15 degree tilt and lifts screen a few mm … couldn't find a model with magnets to hold it in place so quickly created this.
Print …
Easy to print -
- PETG / PLA or whatever
- 0.24mm layer height
- 15% infill
- no supports
(excuse slightly “meh” finish on print, yours will be far better I'm sure - filament was damp from factory!)
NOTE: when inserting magnets from underside, make sure you have the polarity right for the base of the echo show.
- 6x3mm version requires 2x magnets per hole to really hold the base nicely
- 10x3mm version created / added but not tested (would imagine 6 10mm magnets should be fine though - let me know in comments)
HINT: to press magnets in to place get a steel hex/allen key or similar - should not need glue.