E3D Nozzle Fun Pack Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print out an insert for your E3D fun pack! Adds a space for a 0.4mm nozzle, and prints in two colors for readable labels
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 47
- Wydruki
- 2
- Wyświetlenia
- 355
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Print out an insert for your E3D fun pack! This model makes space for all the nozzles included in the E3D nozzle funpack, as well as a space for a 0.4mm nozzle. The model includes readable labels for each of your model types.
Three variants are included:
- MMU2 mode
- Manual color change mode
- Colorprint mode
MMU2 will print as automatically as your MMU2 is able. Manual color change mode has a profile set up that uses M600 to change filament mid-layer. Colorprint will switch for the entire layer.
Note - the threads on the nozzle holders are pretty tight. Depending on your printer capabilities and tolerances, you will likely need a wrench to install the nozzles the first time but after that they will be fine.
Happy printing!