Thumbscrew Cap for M6 Machine Screw (Battery Cover Fastener for Audi TT MK1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thumbscrew design can be used on any M6 Hex Head screw, but was specifically designed to secure a car battery cover.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 643
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Quick simple print, works great. Came out much better than expected on a Prusa MK3.
Printed with no supports. I ended up using PET and ABS because I wanted to use this print in an automotive application.
Assembly notes:
- First screw the base piece onto the threads, all the way to the head.
- Place the cap on a hex wrench and then insert it into the screw.
- Keeping the head and the cap aligned, press the pieces together.
I found that for my application press-fit was good enough that I did not need glue.
However bottom and top pieces are designed with 1mm overlap so that if you decide to glue it you can. So 3 things are securing the thumb screw:
- The friction between the head and the sides of the screw head
- The bottom piece is threaded onto the screw, and pressing against the inner surface of the head cover
- Optional. Any glues or adhesives you might use
Overall the end result looks very professional.