EVA 3 Beacon3D Probe UHF / Volcano Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Beacon3D but corrected and adjusted
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 788
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found one model that was close to what I needed but lacking few things to be perfect.
When I imported it in 3D modeling software, I noticed that Z offset from nozzle is out of recommended distance, there was wrong model of Rapido inserted so Z distance was not good.
Second thing there was no place to add M3S insert so I redesigned hole so Ruthex M3S (and compatible others) can be inserted and add additional material around hole so insert make good connection.
I wanted to add cable releaf but didn't want to disassemble EVA3 and I found simpler way to implement cable relief, you only need 5mm longer screw than original.
Distance from center of nozzle:
X= 0 mm
Y= 16.978 mm
Z = 2.6 mm (2.6 to 3 mm recommended, so closest to the bed)