EVA 3 Beacon3D Probe UHF / Volcano Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for Beacon3D but corrected and adjusted
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 85
- Makes
- 0
- Views
- 789
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I found one model that was close to what I needed but lacking few things to be perfect.
When I imported it in 3D modeling software, I noticed that Z offset from nozzle is out of recommended distance, there was wrong model of Rapido inserted so Z distance was not good.
Second thing there was no place to add M3S insert so I redesigned hole so Ruthex M3S (and compatible others) can be inserted and add additional material around hole so insert make good connection.
I wanted to add cable releaf but didn't want to disassemble EVA3 and I found simpler way to implement cable relief, you only need 5mm longer screw than original.
Distance from center of nozzle:
X= 0 mm
Y= 16.978 mm
Z = 2.6 mm (2.6 to 3 mm recommended, so closest to the bed)