1 / 3
Power Amplifier for the Bass Drum Pedal
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount on your drum pedal to make it easier to get a clear sound from the bass drum.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 765
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Introduction
The technique of transmitting power over a small area to the kick pedal is well known.
This is one approach that makes it easier to transmit power to the bass drum.
This is a support tool that attaches to the foot pedal.
When you step on the foot pedal, your foot will make contact with a point instead of a surface, allowing you to play the bass drum clearly and loudly.
I use it on the left side of the twin pedals to help even out the sound on both. Of course, it could be attached on the right side.
Build info.
- No support material is needed.
- PLA or PETG is better.
- It comprises two parts.
- Other parts are needed.
- M3 nuts x2
- M3 x 25(or longer) screws x2
Assembly Instruction
- Print the upper part and the lower part first.
- Insert M3 nuts into the hexiagonal holes on the lower part.
- Tighten the M3 screws so that the footboard is sandwiched between the upper part and the lower part.
