CPAP Tamer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduce weight of the CPAP hose on the toolhead and make sure your hose doesn't knock your nice magnetic panels off!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 1201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this to serve two purposes. The first being that every time I would park my Euclid probe, the CPAP hose would knock my magnetic panel off of my Voron 2.4. Very annoying. The second reason was to reduce a bit of the weight from the hose, canbus wiring, and bowden tube from the tool head.
The bracket attaches with two M5x6mm BHCS bolts, and two M5 2020 extrusion nuts. The CPAP hose, bowden, wire bundle, liquid cooling hoses, or whatever else are supported by two zip ties.