Pi Zero/Zero2 3.5 Inch Touch Screen Display Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi 0/02 3.5 inch Touchscreen Case My take on a case for a Raspberry Pi 0 with a 3.5-inch touchscreen case. I…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 455
- Wydruki
- 2
- Wyświetlenia
- 2416
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Raspberry Pi 0/02 3.5 inch Touchscreen Case
My take on a case for a Raspberry Pi 0 with a 3.5-inch touchscreen case. I have modeled the styling on the Ratrig vMinion styling.
This is compatible with Generic 3.5 touch screens such as those you can buy on Ali Express and Amazon (Models MHS3.5 or 3.5 inch RPI Display. It will not work with the WaveShare 3.5 display as WaveShare mount the display panel in a different orientation..
There are mounting holes on the back case for 2040 & 3060 profiles, M3 size. The Pi Mount uses M2 Heat Inserts, if there is any demand I can change these to be self-tapping.
Fusion 360 File Included
Printing
Lay the pieces flat on the build plate, no supports are required.
Other Designs
Check out my other stuff & follow!
https://www.thingiverse.com/micahjj/designs
Feedback and Makes
It makes a difference and feels great when you leave a comment, like, or collect things from the people who post them, so PLEASE do that for all people as it builds community.
Please do this for all the stuff you download from everybody!
Category: Tablet