VRM fan cooler for aliexpress Qiyida X99 ED4 board - V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VRM fan cooler for aliexpress Qiyida X99 ED4 board and others like Kllisre X99 V201, Machinist x99 PR9...
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 396
- Wydruki
- 1
- Wyświetlenia
- 4084
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT: V2 uploaded. improved airflow.
I need to improve the VRM cooling in order to put a 20 core Xeon (E5-2673-V4), I'm already using a 16 core Xeon (E5-2683-V4) in this board without any cooling and the vrm cooler was very hot.
My board is a Qiyida x99 ED4, but other boards has the same VRM cooler, this mods has compatibility with.
- Qiyida X99 ED4
- Kllsre X99 V201
- Machinist X99 PR9
- Atermiter X99H
- Wovibo X99H
You can check on youtube, these boards achieve 70ºC-80ºC of heatsink temperature with CPU's with 120-135W tdp stock with little/no airflow.
This print you can fit both orientations, use the best can fit you in your combination with your heatsink/case.
BOM
- 4x M3x12mm screws (you can use M3x14mm) (in photos used M3x12mm)
- 4x M3x18mm screws (you can use M3x20mm instead, used this in photos)
- 2x M3x25mm screws (M3x30mm screws in photos)
- 2x M3x5 heat insert
- 8x M3 hex nuts
- 2x 40mm fans (used GSDTIME 7500rpm 24v that I use in my voron, with 12v input produces good airflow without to much noise)
Printing
- Avoid PLA, ABS/ASA recommended. I think PETG can withstand but definitely not recommended.
- 4 perimenters at least
- Print V2