1 / 2
FluidNC laser/CNC controller board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This board is mainly an IO board allowing: to control 3 stepper motors (see later) to detect 3 independant home…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This board is mainly an IO board allowing:
- to control 3 stepper motors (see later)
- to detect 3 independant home switches
- to apply PWM to the laser controller (see later)
- to detect interlock door switches
- to drive 4x220V relays for air assist, vacuum pump, water cooling and light
- to read 3 more inputs
It is controlled by FluidNC / GRBL firmware
It's part of an open source open hardware project to retrofit an old Trotec laser engraver
Project is here : https://hackaday.io/project/193893-retrofitting-an-old-laser-engraver
PCB can be found on PCBWay shared projects : https://www.pcbway.com/project/shareproject/FluidNC_laser_controller_board_70101fd4.html
Category: Electronics