1 / 2
FluidNC laser/CNC controller board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This board is mainly an IO board allowing: to control 3 stepper motors (see later) to detect 3 independant home…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This board is mainly an IO board allowing:
- to control 3 stepper motors (see later)
- to detect 3 independant home switches
- to apply PWM to the laser controller (see later)
- to detect interlock door switches
- to drive 4x220V relays for air assist, vacuum pump, water cooling and light
- to read 3 more inputs
It is controlled by FluidNC / GRBL firmware
It's part of an open source open hardware project to retrofit an old Trotec laser engraver
Project is here : https://hackaday.io/project/193893-retrofitting-an-old-laser-engraver
PCB can be found on PCBWay shared projects : https://www.pcbway.com/project/shareproject/FluidNC_laser_controller_board_70101fd4.html
Category: Electronics