22-20mm Sand Blasting Nozzle Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to avoid using two different nozzle sizes in our blasting cabinet. The 20mm nozzles are much easier to find.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 559
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
My sandblasting cabinet has three different nozzle sizes for the center blaster, hand held blaster and pressure pot blaster. I wanted to reduce down to a commonly available blaster nozzle size for the center and siphon feed blasters. This adapter allows me to use a common 20mmx35mm Boron Carbide nozzle in the hand held siphon fed blaster instead of the 22mmx38mm that is much harder to find.
As always, I attached the Solidworks file so you can feel free to use it how you need to.
I took me 17mins to print on the .28mm Draft setting with the Bambu X1C and basic PLA.