1 / 6
2020 and 2040 Attachment holds a Micro to SD Extension and 3 SD Cards
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use it, Spread it, Remix it! This 2020 Attachment holds a Micro to SD Extension and 3 SD Cards. Dimensions of…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Use it, Spread it, Remix it!
This 2020 Attachment holds a Micro to SD Extension and 3 SD Cards.
Dimensions of extension: 2 x 0.4 x 0.4 inches (50.8 x 10.16 x 10.16mm)
The adapter sits halfway into the part to allow for the SD orientation on the adapter to be seen.
Print Settings
Initial Layer Height: 0.15mm
Layer Height: 0.2mm
Line Width: 0.35mm
Wall Thickness: 1mm
Wall Line Count: 3
Infill: 10% Gyroid
Plate Adhesion: Brim (8mm brim width)
Category: 3D Printer Accessories